Profile picture for user kchaudhary.eee

Dr. Kalpana Chaudhary

Professor
Department of Electrical Engineering Indian Institute of Techno
Phone No(s): 9936638447
Email: kchaudhary.eee@iitbhu.ac.in
Area of Interest: Power Electronics; Electrical Machines and Drives; Satellite Solar Power Station; Switched Reluctance Motor for Electric Vehicle Application; PMBLDC Motor; MPPT techniques for Photovoltaic Energy Conversion; Wireless Power Transmission; Renewable energy Generation
                    Vist my Website

* Ph. D from Indian Institute of Technology (Banaras Hindu University) on the thesis entitled "Some Theoretical Studies on Satellite Solar Power Station" in 2009


* M.Tech in Power Electronics Electrical Machines and Drives (PEEMD) from Indian Institute of Technology, Delhi in 1999


* B.E. in Electrical Engineering from Madhav Institute of Technology and Science, Gwalior in 1997.
 

 * Professor in Electrical Engineering Department of Indian Institute of Technology (B.H.U.) from 28th November 2024 till date

* Associate Professor in Electrical Engineering Department of Indian Institute of Technology (B.H.U.) from 30 March 2016 to 28th November 2024.

*Assistant Professor (Stage-II) in  Electrical Engineering Department of Indian Institute of Technology (B.H.U.)from June 2012 to 30th March 2016

* Assistant Professor (Stage-II) in Electrical Engineering Department of Institute of Technology, B.H.U. from April 2008 to June 2012

* Lecturer in Electrical Engineering Department of Institute of Technology, B.H.U. from July 2002 to April 2008

*Assistant System Engineer in Tata Consultancy Services from October 2001 to April 2002

B.Tech Level Course

* DC Machines and Transformer
* Synchronous Machines and Induction Machines
* Electrical Utilization
* Electrical Machine Design
* Analysis and Control of Electric Drives
* Power Semiconductor Controlled Drives
* Power Electronic Devices

M.Tech Level Course
* Power Electronic Converter-I
*Power Electronic Converter-II
*Special Electrical Machines
* Power Semiconductor Devices
* Power Semiconductor Controlled Drives

Ph.D Thesis Awarded (04) (Sole Supervisor)

[1] Dr. Deepak Kumar (Roll no.  14081001), " Design and Analysis of Rectenna with Power Management Circuitry for Satellite Solar Power Station" Awarded in 2018,  Department of Electrical Engineering, Indian Institute of Technology (B.H.U.) .

[2]  Dr. Tripurari Das Gupta  (Roll no. 15181001), " Studies on Design Modifications in Single-Tooth Winding Double-Stator Switched Reluctance Motor for Torque Ripple Mitigation" Awarded in  2021, Department of Electrical Engg, Indian Institute of Technology (B.H.U.).

[3] Dr. Kumar Abhishek Singh( Roll no.17081002), "Investigations on Photovoltaic-Wind Hybrid Power Generation System in DC Microgrid", Awarded in  2022, Department of Electrical Engg, Indian Institute of Technology (B.H.U.).

 [4] Dr. Mukesh Kumar( Roll no. 16081005) , "Design and Analysis of High Gain Bidirectional Converters for PMBLDC Motor in Electric Vehicle Application",  Awarded in  2022, Department of Electrical Engg, Indian Institute of Technology (B.H.U.).

Ph.D Thesis Submitted (01) (Sole Supervisor)

[1] Mr. Ashish Prajapati (Roll no. 19081010), "Design and Development of High Gain Converters for Fuel Cell-Photovoltaic Based DC Microgrid", Thesis Submitted on 11.09.2024.

Ph.D Research work ongoing (03) (Sole Supervisor)

[1] Mr. Piyush Singh (Roll no. 22081502), Broad Topic: Design and Development of Energy Efficient and Compact Electric DriveTrain for Fuel Cell Electric Vehicle)

[2] Mr. Vineet Bharadwaj(Roll no: 23081008): Broad Topic: Some Studies on Multilevel Inverter Fed PMSM Drive for Electric Vehicle Application.

[3] Ms. Amita Patel (Roll no; 23081001): Broad Topic: FEM Based Design Modifications in Special Electrical Machines for Torque Ripple Mitigation.

M.Tech Dissertation:

[A] M.Tech Dissertation Completed: (55) 
1.Aman Gope (Roll no. 19084005), "Design, Analysis and Development of Dual Input Single Output Converter for Fuel Cell Electric Vehicle",  (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2024.

2. Sameer Singh (Roll no. 19084021," Design of Electric Drivetrain for Switched Reluctance Motor Based Fuel Cell Electric Vehicle",  (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2024.

3. Adarsh Srivastav(18084001), " Converter  for IOT-Based Automation of Battery Electric Vehicle, ",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2023.

4. Aleem Siddiqui(18084022), " Multi Input Single Output DC-DC Boost Converter for Hybrid Fuel Cell Electric Vehicle", ",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2023.

5. Sagar Kumar (21082009), "“Design, and Development of Fuel Cell Fed PMBLDC Motor Drive For Electric Vehicle Applications", (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2023.

6. Abhay Janardan Singh (21082002), "Fuel cell Input Based PMSM Motor Drive for Electric Vehicle Applications"'", (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2023.

7. Rajeev Kumar Singh, " Design of switched reluctance motor for transportation application" (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2003 (Co-supervisor).

8.Pankaj Chaudhary, " Decoupled control of linear induction motor", (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2007 (Co-supervisor).

9.Manish Pathak, " Design of switched reluctance motors and development of converter for vehicle propulsion", (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2009.

10. Amrendra kumar Thakur, " Volts/Hertz control of induction motor drive&its simulink implementation", (Specialization: Electrical machines and drives), Indian Institute of Technology(B.H.U.), 2009 (co-supervisor).

11.Alok Tripathi, " Implementation of open loop VVVF control of induction motor using DSPACE 1104", (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2010.

12.T.Sandeep Kumar, " Performance investigation of Z-source inverter for electric vehicle application", (Specialization: Power Electronics), Indian Institute of Technology (B.H.U.), 2010.

13.Vibhav Joshi, " Analysis and simulation of single stage single switch electronic ballast for compact fluorescent lamps", (Specialization: IDD in Power electronics), Indian institute of technology (B.H.U.), 2011.

14.Ram Prasad Sinha, " Modelling and simulation of front end dc-dc boost converter for fuel cell application", (Specialization: IDD in power electronics), Indian institute of technology (B.H.U.), 2011.

15.Shiva kumar Balusula, " Experimental investigation of open loop control schemes using VFD & PWM inverter and FEM analysis of three phase induction motor", (Specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2011.

16.Surendra Reddy, " Multilevel inverter based active power filter with direct power control theory", (Specialization: Power Electronics), Indian institute of technology (B.H.U.), 2012.

17.Varun Chitransh, " Voltage oriented control of three phase PWM boost rectifier", (Specialization: Power Electronics), Indian institute of technology (B.H.U.), 2012.

18. Amit SIngh, " Mechanical load emulator for testing electric drive system", (Specialization: Electrical machines and drives), Indian institute of technology(B.H.U.), 2012 (Co-Supervisor).

19.Shuchi," Analysis and design of power electronic transformer based traction converter for railway application", (Specialization: IDD in Power Electonics), Indian institute of technology (B.H.U.), 2013.

20.Saurabh Sinha, " Analysis and modelling of resonant converter for high voltage power supply of electrostatic precipitator", (Specialization: IDD in Power Electronics), Indian institute of technology (B.H.U.), 2013.

21. Abhishek Prakash, "Z-source converter based dynamic voltage restorer", (Specialization: IDD in Power Electronics), Indian institute of technology (B.H.U.), 2013.

22.Ravi Pachauri, " Design simulation and analysis of FM-ZCS quasi resonant converter for dc servo drive", (Specialization: Power Electronics), Indian institute of technology (B.H.U.), 2013.

23.Avdhesh Kumar, " Design optimization of switched reluctance motor for hybrid electric vehicle operation", (Specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2013.

24.Tez Prakash Verma," Radio frequency control of multiple induction motors", (Specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2013.

25. Vikrant kumar (Roll no. 13082011)," Real time implementation of constant Volts/Hertz control scheme of induction motor using DSPACE DS1004 platform", (Specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2013.

26.Prashant J.P., "some studies on switched reluctance motor", (specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2013.

27.Kumar Abhishek Singh (Roll no. 15082005), " Comparative analysis of different control techniques for current ripple minimization of PMBLDC motor", (Specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2017.

28.Om Prakash Sihag (Roll no. 15082008), " Design, modelling and simulation of switched reluctance motor for torque ripple minimization", (Specialization: Electrical machines and drives), Indian institute of technology (B.H.U.), 2017.

29.Tanushree Sahu(Roll no. 12404EN006), "Design and implementation of a 5-level multilevel inverter topology with reduced number of switches", (Specialization: IDD in Power electronics), Indian institute of technology (B.H.U.), 2017.

30.Abhinav Jain ( Roll no. 12404EN010), "Implementation of bidirectional dc-dc converter for charging and discharging modes of battery" (Specialization: IDD in Power Electronics), Indian institute of technology (B.H.U.), 2017.

31. Abhilash shanker (Roll no. 12404EN016), "Design, simulation and hardware implementation of fuzzy logic controlled dc-dc converter", (Specialization: IDD in Power electronics), Indian institute of technology (B.H.U.), 2017.

32. Ashutosh Jalan (Roll no. 13084005), " Power factor correction of PMBLDCM drive for adjustable speed application using buck-boost converter", (Specialization: IDD in Power Electronics), Indian institute of technology (B.H.U.), 2018.

33.Ankur Sharma (Roll no. 13084002)," Isolated bidirectional DC-DC LLC resonant converter for battery charging application", (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2018

34. Ritesh Kumar (Roll no. 16082008),"On board charger with centre tapped windings switched reluctance motor drive in electric vehicle applications", (Specialization: Electrical machines and drives), Indian Institute of Technology (B.H.U.), 2018.

35.Deepak Chaudhary (Roll no. 14084009), "Simulation and Hardware Implementation of PV Standalone System Using Quadratic Boost Converter", (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

36.Kunal Kumar (Roll no. 14084012), " Modified Non-Isolated Bidirectional DC-DC Converter for Electric Vehicle Application", (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

37.Nitish Kumar (Roll no. 14084015), "Design, Simulation and Hardware Implementation of MPPT Control on PV Panel with Voltage Control using Four Phase Interleaved Boost Converter", (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

38.Prakhar Rastogi (Roll no. 14084022), "Comparative Analysis of Asymmetric Bridge Converter and C-Dump Converter Fed SRM Drive" (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

39.Sayantan Roy Chowdhury(Roll no. 14084018), " Modified and Integrated Multiple Output Synchronous Buck Converter for Electric Vehicular Application", (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

40.Siddharth Bhattacharya(Roll no. 14084019), " Design and Implementation of Modified Bridgeless Cuk Converter for Power Factor Correction in SRM Drive",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

41.Kartik Rathee(Roll no. 14084011), "Design and Simulation of Standalone Solar Panel Driven Power Transmission System", (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2019.

42.Asif Jamal (Roll no. 17082010),"Indirect Field Oriented Control of a Three Phase Induction Motor Fed by Bidirectional Quasi Z-Source Inverter", (Specialization: M.Tech in Electrical Machines and Drives), Indian Institute of Technology (B.H.U.), 2019.

43.Lalit Kumar Singh(Roll no. 17082011), "Power Factor Correction of BLDC Motor Drive using Canonical Switching Cell Converter", (Specialization: M.Tech in Electrical Machines and Drives), Indian Institute of Technology (B.H.U.), 2019.

44. Shantam Yashasvi(Roll no. 18082303), "Converter Based Approach towards the Torque Ripple Minimization in Switched Reluctance Motor", (Specialization: M.Tech inPower Electronics), Indian Institute of Technology (B.H.U.), 2020.

45.Alok Kumar (Roll no. 15084003), " Regeneration in Split DC Supply Converter Fed SRM Drive for E.V. Application",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2020.

46.Anuj Agrawal  (Roll no. 15084004), " Sensorless Control of PMBLDC Motor Using Speed Independent H Functions",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2020.

47.Ayush Kumar Goyal (Roll no. 15084005), " Modelling and Simulation of PV and Wind Based Standalone Hybrid Energy System",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2020.

48.Harshit Kumar Pandey (Roll no. 15084007), " Study of Bi-directional Power Converter Using BLDC Motor for Flywheel Energy Storage Systems",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2020.

49. Narkedamilli Sai Sumanth(Roll no. 15084010), " Regenerative Braking in PMBLDC Motor for Electric Vehicle Application",(Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.), 2020.

50.Chandan Kumar Singh (Roll no. 19082009), "Photovoltaic and Fuel Cell Based Hybrid Electric System,  (Specialization: M.Tech in Electrical Machines and Drives), Indian Institute of Technology (B.H.U.), 2021.

51. Indrasis Roy (Roll no. 20082012), "PMBLDC Motor drive fed by photovoltaic and fuel cell based hybrid electric system", (Specialization: M.Tech in Electrical Machines and Drives), Indian Institute of Technology (B.H.U.), to be completed in 2022.

52.Dixchen Ghising (Roll no. 20082043), " Topology of Nine Level Nested Neutral Point Clamped Inverter With Induction Motor Drive",  (Specialization: M.Tech in Electrical Machines and Drives), Indian Institute of Technology (B.H.U.), 2022.

53.Manoj Pokhriyal (Roll no. 20082016), "Finite Element Method Based Design and Analysis of a Low Torque Ripple Double-Stator Axial Flux Switched Reluctance Motor", (Specialization: M.Tech in Electrical Machines and Drives), Indian Institute of Technology (B.H.U.), 2022.

54.Shubham Tiwari, "Study of Photovoltaic and Fuel Cell Based Hybrid DC-DC Converter for Charging Applications" (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.)  2022.

55. Diksha (Roll no.19084028)  "Study on Fuel Cell-Photovoltaic Hybrid Electric Systems" (Specialization: IDD in Power Electronics), Indian Institute of Technology (B.H.U.)  2024.

[B] M.Tech Dissertation in progress : ( 04)

Book Published:

  1. “Satellite Solar Power Station” by Kalpana Chaudhary, November 2011,

Lambert Academic Publishing GmbH & CO. KG, Germany, ISBN-13: 978-3-8465-9101-7.

https://www.amazon.in/Satellite-Solar-Power-Station-Architecture/dp/3846591017/ref=sr_1_18?dchild=1&keywords=satellite+solar+power+station&qid=1624294122&sr=8-18

 
Book Chapter:
 

  1. D Kumar, K. Chaudhary, “Design of 5.8 GHz Rectenna for Space Based Solar Power”, Advances in Electronics, Communication and Computing, Springer, pp. 705-712.
  2. D Kumar, K. Chaudhary, “Design Study of 5 GW Base Load Power Drawn from Satellite Solar Power Station”, Advances in Power Systems and Energy Management, Springer, pp. 655-663.
  3. D Kumar, K. Chaudhary, “5.8 GHz Antenna Array Design for Satellite Solar Power Station”, Advances in Smart Grid and Renewable Energy, Springer, pp. 659-666.
  4. Kumar M., Kumar K., Chaudhary K. (2021) Modified Non-isolated Bidirectional DC–DC Converter for Regenerative Braking for Electric Vehicle Applications. In: Mohapatro S., Kimball J. (eds) Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control. Lecture Notes in Electrical Engineering, vol 616. Springer, Singapore. https://doi.org/10.1007/978-981-16-1978-6_7.

 
Journal Papers:
 

  1. A. Prajapati and K. Chaudhary, "Analysis and Design of Integrated Boost-Luo Converter With Reduced Voltage Stress for Renewable Application," in IEEE Journal of Emerging and Selected Topics in Industrial Electronics, vol. 5, no. 4, pp. 1613-1624, Oct. 2024, doi: 10.1109/JESTIE.2024.3365388.

  2. Prajapati A, Chaudhary K. High gain bipolar converter with reduced input current ripple for fuel cell integrated DC microgrid. International Journal of Circuit Theory and Applications. 2024; 1-29. doi:10.1002/cta.4174

  3. Ashish Prajapati, Tripurari Das Gupta, Kalpana Chaudhary, "AC to DC bridgeless SEPIC converter-based fuel cell emulator", International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 15, No. 3, September 2024, pp. 1651~1661 (SCOPUS).

  4. Kalpana Chaudhary, Kartikey Bhardvaj, Ayushi Chaudhary, " A Qualitative Assessment of Hydrogen Generation Techniques for Fuel Cell Applications", Fuel Vol. 358 Part A (2024) 130090 (SCI) Elsevier, https://doi.org/10.1016/j.fuel.2023.130090.                      (Impact Factor: 7.4), .

  5. Mukesh Kumar, Kalpana Chaudhary, "Bidirectional Converter with Coupled Inductor for High Gain and Low Ripple in PMBLDC Motor for Electric Vehicle Application", Journal of Electrical Systems, Vol. 18, Issue 4, pp.496-519, 2022 (SCOPUS).

  6. Tripurari Das Gupta, Kalpana Chaudhary, "Design Enhancent and Comparative Analysis of Low Torque Ripple Double-Stator Switched Reluctance Motor", Journal of Electrical Systems, Vol. 18, Issue 3, pp. 406-420, 2022 (SCOPUS).  
  7. Kalpana Chaudhary, Manoj Pokhriyal, and Ayushi Chaudhary, "Design Improvements in Double-Stator Axial Flux Switched Reluctance Motor for Smoother Torque Profile," Progress In Electromagnetics Research C, Vol. 124, pp. 227-242, 2022.doi:10.2528/PIERC22071105, http://www.jpier.org/PIERC/pier.php?paper=22071105 (SCOPUS) (Impact Factor: 1.69)
  8. K. A. Singh, A. Chaudhary and K. Chaudhary, "Three-phase AC-DC Converter for Direct-drive PMSG-based Wind Energy Conversion System," in Journal of Modern Power Systems and Clean Energy, vol. 11, no. 2, pp. 589-598, March 2023, doi: 10.35833/MPCE.2022.000060 (SCIE) (Impact Factor: 6.3).
  9. Kalpana Chaudhary, Kumar Abhishek Singh, Ayushi Chaudhary, "Integrated Quadruple Output Synchronous Buck Converter for E-Mobility Application", IEEE Transactions on Industry Applications, Vol. 58, Issue 5, pp. 5558-5567, Sept-Oct 2022, DOI: 10.1109/TIA.2022.3152979 (SCI) (Impact Factor: 4.079).
  10. Mukesh Kumar, Kumar Abhishek Singh, Kalpana Chaudhary, R.K.Saket, Baseem Khan, "Regenerative Braking in Electric Vehicle Using Quadratic Gain Bidirectional Converter", International Transactions on Electrical Energy Systems, Vol. 2022, January 2022,  https://doi.org/10.1155/2022/4024730 (WOS and SCIE), (Impact Factor: 2.639).
  11. Mukesh Kumar, Kalpana Chaudhary, R.K. Saket, Baseem Khan, " Bidirectional Quadratic Converter-Based PMBLDC Motor Drive for LEV Application", Journal of Electrical and Computer Engineering,  Vol. 2022 |Article ID 5984969 | https://doi.org/10.1155/2022/5984969 (SCOPUS) (Impact Factor: 2.4).
  12. T. Das Gupta, K. Chaudhary, "Research on Torque Ripple Minimization of Double-stator Switched Reluctance Motor Using Finite Element Method," Advances in Electrical and Computer Engineering, vol.21, no.4, pp.135-144, 2021, doi:10.4316/AECE.2021.04015 (SCIE) (Impact Factor: 0.8).
  13. K. A. Singh, A. Prajapati and K. Chaudhary, "High gain compact interleaved boost converter with reduced voltage stress for PV application," in IEEE Journal of Emerging and Selected Topics in Power Electronics, , VOL. 10, NO. 4, PP. 4763-4770. AUGUST 2022. (SCI) (Impact Factor: 5.5).
  14. Tripurari Das Gupta and Kalpana Chaudhary, "Finite Element Method Based Design and Analysis of a Low Torque Ripple Double-Stator Switched Reluctance Motor," Progress In Electromagnetics Research C, Vol. 111, 191-206, 2021.doi:10.2528/PIERC21022001 (SCOPUS)  (Impact Factor: 1.69).
  15. T. D. Gupta, K. Chaudhary, R. M. Elavarasan, R. K. Saket, I. Khan and E. Hossain, "Design Modification in Single-Tooth Winding Double-Stator Switched Reluctance Motor for Torque Ripple Mitigation," in IEEE Access, vol. 9, pp. 19078-19096, 2021, doi: 10.1109/ACCESS.2021.3052828 (WOS and SCIE), (Impact Factor: 3.679).
  16. Kumar Abhishek Singh, Kalpana Chaudhary, " Design and development of a new three‐phase AC‐DC single‐stage wind energy conversion system" IET Power Electronics, Vol 14, pp. 302-312,  DOI: 10.1049/pel2.12034, 2021 (WOS and SCIE), (Impact Factor: 2.112).
  17. D. Kumar, K. Chaudhary, "Design of Circular Polarized Printed Rectenna for Satellite Solar Power Station Array Construction", International Journal of Engineering and Technology(UAE), 7(4), pp. 254-256, 2018 (SCOPUS).
  18. Deepak Kumar, Kalpana Chaudhary, “Design of an Improved Differentially Fed Antenna Array for RF Energy Harvesting”, IETE Journal of Research (Taylor and Francis), 2020, https://doi.org/10.1080/03772063.2018.1488628  Print ISSN: 0377-2063 Online ISSN: 0974-780X (WOS and SCIE) (Impact Factor: 1.877).
  19. Deepak Kumar, Kalpana Chaudhary, “Cost Minimization Strategy for Satellite Solar Power Station”, International Journal of Renewable Energy Research, Vol 8, No. 1(2018), pp. 488-494, 2018 (SCOPUS).
  20. D Kumar, K. Chaudhary, “Design of Differential Source Fed Circularly Polarized Rectenna with Embedded Slots for Harmonics Suppression”, Progress in Electromagnetics Research C, pp. 175-187, 2018 (SCOPUS) (Impact Factor: 1.69).
  21. D Kumar, K. Chaudhary, “High Frequency Harmonic Harvester Rectenna for Energy Storage Application”, International Journal of Power Electronics and Drive Systems, Vol 9, Issue 1, pp. 252-259, 2018 (SCOPUS).
  22.  K. Chaudhary, D. Kumar, “Satellite Solar Wireless Power Transfer for Baseload Ground Supply: Clean Energy for the Future” European Journal of Futures Research, 2018 6:9,  https://doi.org/10.1186/s40309-018-0139-7 (SCOPUS and SSCI) (Impact Factor: 1.679).  
  23. Lalam S. Sindhura, Kalpana Chaudhary, “ Artificial Neural Network Implementation for Maximum Power Point Tracking of Optimized Solar Panel”, Vol. 78, no. 10, Sept. 2013, International Journal of Computer Applications, 0975-8887.
  24. K. Chaudhary and Babau R. Vishvakarma, “Effect of Ionospheric Induced Depolarization on Satellite Solar Power Station”,  Vol. 9, pp. 39-47, 2009, Progress in Electromagnetics Research Letters (USA), ISSN 1937-6480 (SCOPUS).
  25. Kalpana Chaudhary and B.R. Vishvakarma, “Comparative Study of LEO and GEO SSPS for Some Identified Sites in India”, Vol. 10, Issue. 4, Article , 2010, International Journal of Emerging Electric Power Systems (BEPRESS, Canada), ISSN 1553-779X (SCOPUS).
  26. Kalpana Chaudhary and B.R. Vishvakarma, Feasibility Study of LEO, GEO and Molniya Orbit Based Satellite Solar Power Station for Some Identified Sites in India” Vol 46, Issue 9, pp 1177-1183, Advances in Space Research (Elsevier), ISSN 0273-1177, 2010, (WOS and SCI), (Impact Factor: 2.6)..
  27. Kalpana Chaudhary, B.R. Vishvakarma and M.K. Meshram, “Comparative Analysis of  Conversion Efficiency of 2.45 GHz Rectenna Configurations for Microwave Power Transmission” International Journal of Applied Engineering Research (India), ISSN 0973-4562,  Vol. 4, No. 5, pp. 665-670, May 2009.
  28. Kalpana Chaudhary, B.R. Vishvakarma and M.K. Meshram, “Satellite Solar Power Station: System Architectures, Concepts and Technologies”, International Journal of Applied Engineering Research (India), ISSN 0973-4562,  Vol. 4, No. 6, pp. 1063-1069, 2009. 


 Conference Papers:  


1.Sameer Singh, Kalpana Chaudhary, " Design of Electric Drive-Train for Switched Reluctance Motor Based Fuel Cell Electric Vehicle", IEEE International Conference on Intelligent Systems, Smart and Green Technologies, College of Engineering Campus, Andhra University, Visakhapatnam, 2-3 November 2024 .

2. Piyush SIngh, Kalpana Chaudhary, " Multiport Bidirectional Converter With Resonant and PWM Modes for Drives Application", IEEE International Conference on Intelligent Systems, Smart and Green Technologies, College of Engineering Campus, Andhra University, Visakhapatnam, 2-3 November 2024 .

3 .Aman Gope, Kalpana Chaudhary, "Efficient Dual-Input DC-DC Converter Design for Fuel Cell Electric Vehicle Integration" IEEE Power Electronics Drives and Energy Systems (PEDES 2024, NIT Surathkal, Karnataka (Accepted).

4. Kalpana Chaudhary, Piyush Singh, Abhay Janardan Singh. " Fuel Cell Input Based PMSM Motor Drive for Electric Vehicle Applications", 2023 IEEE 3rd International Conference on Smart Technologies for Power, Energy and Control (STPEC), 10-13 December 2023, KIIT Bhubaneswar .

5. Ashish Prajapati, Piyush Singh, Kalpana Chaudhary, "Non Isolated High Gain Bipolar Converter for Renewable Application", 3rd International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE 2023), 17-20th December 2023, Trivandrum

6. Ashish Prajapati, Vineet Bharadwaj, Kalpana Chaudhary, ""Isolated DC microgrid operation with hybridization of PV, FC, and Battery", IEEE ITEC India 2023, December 13-15 2023 .

7.I.Roy, Kalpana Chaudhary, Amit Jain, " A New Harmonic Compensation Based Modified Field Oriented Control of Permanent Magnet BLDC Motor with Reduced Torque Pulsation", IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (IEEE SeFeT 2023), 9-12 August 2023, Bhubaneswar, India.

8. Kumar Abhishek Singh, Kalpana Chaudhary, " High Gain Boost Converter with Ripple Free Input Current for Solar Power Integration in DC Microgrid" IEEE Sustainable Power and Energy Conference (iSPEC), 4-7th December 2022, Perth, Australia.


9. I. Roy and K. Chaudhary, "Slope Regulator Based Advance Angle Control of Permanent Magnet BLDC Motor for Torque Ripple Mitigation for High Speed Operation," 2022 IEEE IAS Global Conference on Emerging Technologies (GlobConET), 2022, pp. 881-886, doi: 10.1109/GlobConET53749.2022.9872371.


10.  K. Chaudhary, K. A. Singh, S. R. Chowdhury and M. Kumar, "A Modified Compact Multiple Output Synchronous Buck Converter for Vehicular Application," 2021 4th Biennial International Conference on Nascent Technologies in Engineering (ICNTE), 2021, pp. 1-6, doi: .1109/ICNTE51185.2021.9487699.


11. Mukesh Kumar, Kunal Kumar and Kalpana Chaudhary, “Modified Non Isolated Bidirectional DC-DC Converter for Regenerative Braking For Electric Vehicle Application”, Symposium on Power Electronics and Renewable Energy Systems Control, (PERESC-2020), 4th -5th  December 2020, IIIT Bhubaneswar.


12.  Abhijeet Sah, Kalpana Chaudhary, V. Venkata Ratnam, “ Non Isolated Multiphase Buck-Boost Converter Design for Electric Vehicle Application”, International Conference on Magnetics, Machines & Drives (AICERA-2014 iCMMD).


13. Kumar Abhishek Singh, Sandeep Soni, Ankit Sachan, and Kalpana Chaudhary, "PWM-based Proxy Sliding Mode Controller for DC-DC Buck Converters", International Conference on Modelling, Simulation and Intelligent Computing (MOSICOM 2020), 29th to 31st January 2020.


14. Deepak Kumar, Kalpana Chaudhary, “ High Efficiency Rectenna Design for Satellite Solar Power Station” , IEEE Uttar Pradesh Section International Conference on Electrical, Computer and Electronics Engineering (UPCON-2016), pp. 546-550, 2016.


15.  D Kumar, K. Chaudhary, “ Analysis of Satellite Solar Power Station as Base Load Power Plant”, IEEE Uttar Pradesh Section International Conference on Electrical, Computer and Electronics Engineering (UPCON-2016), pp. 551-556, 2016.


16. T.D. Gupta, D. Kumar, K. Chaudhary, “Modelling and Analysis of Grid Tied Fuel Cell System with Synchronous Reference Frame Control”, 4th IEEE International Conference on Power, Control& Embedded Systems (ICPCES), 2017, pp. 1-6.


17. Kalpana Chaudhary and Babau R. Vishvakarma, “Comparative Study of Rectenna Configurations for Satellite Solar Power Station” pp. 73-77 , “International Conference on Circuits, System and Simulation” 27th-28th May 2011, Bangkok, ISBN: 978-981-08-8638-7.


18.  Kalpana Chaudhary “Identification of Suitable Site for Solar Power Satellite in India and Comparison of LEO SSPS and GEO SSPS” pp. 1382-1385, The 8th International power engineering conference (IPEC 2007), Singapore, ISBN: 978-981-05-9423-7 © 2007.


19. Ravi Pachauri and Kalpana Chaudhary, “Design & simulation of FM-ZCS quasi resonant converter for DC servo drive application”, National conference on recent developments in control automation and power engineering, 21st and 22nd Feb, 2013, Amity University Noida.


20. B. Surendra Reddy, Kalpana Chaudhary; “Multilevel inverter based active power filter with energy balanced DC link capacitor”, National Power sector Scenario: Prospects, Challenges and Opportunities” (NPSS 2012) in the Department of Electrical and electronics Engineering, Vasavi college of Engineering, April 3rd and 4th, 2012.


21. B. Surendra Reddy, Kalpana Chaudhary; “Design of MLI based active power filter to reduce the harmonics presented in a three phase rectifier fed dc motor with variable load torque”, International conference on electrical and computer science organized by IIMT Bhubaneswar, 5th Dec 2012, Singapore (accepted).

 

* Recipient of SERB-POWER Fellowship in 2021 for Outstanding Research Contribution in the Area of Specialization.

* Women Achiever in Science Technology, Engineering and Mathematics(STEM) , 2023 in the Compendium Published by Confederation of Indian Industries (CII).

Co-Cordinator of Online Short term course on Transition towards Electric Vehicles and their Charging Ecosystem in India (TEVCEI-2021) January 11-16, 2021, Indian Institute of Technology (B.H.U.).

*Cordinator OF "PCB Design Workshop" held on 27th -28th February 2023 in the Department of Electrical Engineering, I.I.T. (B.H.U.).

* Coordinator of "SERB POWER MOBILTY Meeting" held on 3rd November 2023 at IIT (BHU).

* A Ph.D student working under my supervision has got Prime Minister Research Fellowship (PMRF).

* Elevated to Senior Member, IEEE in 2020.

* Conferred with the " Outstanding Woman Researcher in Electrical Engineering" Award for the Contribution and Achievement in the Discipline of Engineering by Venus International Foundation in 2021.

* Conferred with "Best Faculty Award"  by VDGOOD Professional Association in 2020.

* Became Fellow, Institution of Engineers (India) in 2019.

* Became Fellow, IETE in 2023 (F-504046)

 

1. Event: DST PURSE sponsored Faculty Development Program on “Electrical Vehicles Motors and Drives: Design, Analysis, and validation

Institute: SRM Institute of Science and Technology, Chennai

Type: Invited Lecture

Title: High Gain Bidirectional Converters for Regenerative Braking of PMBL DC Motor in Electric Vehicle Application

Date: 22.01.2023

2.Event: Online STTP on "Electric Vehicle" Phase IV, 17-22 May 2021
Institute: LNCT Group of Institutions, Bhopal
Type: Invited Lecture
Date: 18th May 2021.

3. Event: Online Short term course on Transition towards Electric Vehicles and their Charging Ecosystem in India (TEVCEI-2021) 
Institute: Indian Institute of Technology (B.H.U.)
Type: Expert Lecture
 

Consultancy to FISCO Energy Pvt. Ltd. for   "Installation & Commissioning Of 17.5KWp Standalone Roof Top Solar PV system" at  Officer Mess In AF Station Bamrauli, Allahabad

1. Fellow Member, Institution of Engineers(India) (F-124564-5 , 31.10.2018).

2. Senior Member, IEEE (Membership no. 90370302).

3. Fellow Member, IETE (F-504046)

4. Life Member, International association of Computer Science and Information Technology (IACSIT), Membership no. . : 80341209

 * Member, International Advisory Committee of 3rd International Conference on Control, Computing, Communication and Materials (ICCCCM) 2024, United Group of Institutions, Prayagraj, 10-11 August 2024.

*Member, Advisory Committee of International Conference of Modern Approaches in Engineering Science and Management (MAESM-2021) organized by Birla Institute of Engineering and Technology, Lucknow  during April 16-17, 2021.

* Member, Technical Program Committee of 2nd IEEE International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC 2022) organized by Department of Electrical Engineering, GLA University, Mathura, India during 21-22 January, 2022.

*  Member, Technical Program Committee of IEEE 2021 International Conference on Advance in Computing, Communication and Control (ICAC3'21) 7th Edition, 3-4 December 2021.

*Member, Program Committee and Reviewer Board of  2nd International Conference “Women Researchers in Electronics and Computing,” WREC’23 during April 21-23, 2023,  Dr B R Ambedkar National Institute of Technology, Jalandhar, INDIA.

* Served as Subject Expert for  Kerala State Council for Science, Technology and Environment (KSCSTE) in reviewing the Applications received under the Post Doctoral Fellowship Scheme in science subjects and engineering in 2022.


* Served as  Project Pre-Proposal Reviewer for  Kerala State Council for Science, Technology and Environment (KSCSTE) for its Research Support Programme - Engineering and Technology Programme (ETP).

 

* External Examiner of Ph.D Thesis “ RENEWABLE INTEGRATED OFF-GRID SUSTAINABLE POWER SUPPLY SYSTEM FOR REMOTE RURAL AREAS ”, Indian Institute of Technology (ISM) Dhanbad, 2021.

* External Examiner of Ph. D Thesis "Architecture and Power Balancing Strategies of Multifrequency Microgrid", Indian Institute of Technology Guwahati, 2022.

* External Examiner of Ph. D Thesis  “INVESTIGATION ON DESIGN AND DEVELOPMENT OF IMPROVED GAIN NON-ISOLATED SEPIC CONVERTER”, National Institute of Technology, Tiruchirappalli, 2023.

1. Indian Patent filed on 31st May 2023 (Current Status: Requested for expedited Examination)

Title: A MULTI-MODE ELECTRIC VEHICLE

Application No.: 202311037683

Inventors:  Kalpana Chaudhary, Mitanshu Meena

Department of Electrical Engineering, IIT (BHU).

 

 

Member of Editorial Board, Scientific Reports (Nature)

 

  • Convenor, Departmental Post Graduate Committee (DPGC), Department of Electrical Engineering, IIT (BHU), 1.09.2021 to 30.08. 2023.
  • Convenor, Departmental Library Committee, Department of Electrical Engineering, IIT (BHU), 1.09.2021 to 30.08.2024.
  • Member, DUGC, Department of Electrical Engineering, IIT (BHU), 1.09.2023 to 30.08.2024.
  • Member DPGC, Department of Electrical Engineering, IIT (BHU).
  • Member, Staff Committee, Department of Electrical Engineering, IIT (BHU), 12.08.2022 to 30.08.2024.
  • Member, Purchase Committee, Department of Electrical Engineering, IIT (BHU), 5.05.2022 to 18.02.2023.
  • Member, QIP Coordination Committee, Indian Institute of Technology (BHU), 13.12.2021 to 12.10.2023.
  • Member, Women Grievance Cell, Indian Institute of Technology (BHU), 6.02.2013 to 5.03.2019.
  • Member, Internal Complaints Committee, Indian Institute of Technology (BHU), 26.09.2017 to 21.09. 2020.
  • Member, DFAC for one term.
  • DC Secretary for one term, Department of Electrical Engineering, I.T, B.H.U
  • Member, Teaching Learning Cell, Indian Institute of Technology (BHU), 7.12.2020 - 12.10.2023
  • Member, Antiragging Squad, Indian Institute of Technology (BHU), 22.07.2014 to 26.07.2016.
  • Member, Women Grievance Cell, Banaras Hindu University, 18.03.2013-16.04.2016.
  • Purchase Secretary, Department of Electrical Engg, IIT (BHU), 12.07.2013 to 23.08.2014.