Projects in this area include the development of tungsten alloys, additive manufacturing materials, and aluminosilicate-based glass ceramics. A marquee project involves designing an indigenous inert gas atomization system for producing metal powders used in additive manufacturing, with a significant budget of 623.67 Lakhs. The projects currently underway are listed below:
|
Sl No. |
Project Title |
|---|---|
|
1 |
Modeling the deformation bahavior employing the computational approaches PI: Dr. Surya D Yadav Co-PIs: Prof. N C Santhi Srinivas, Dr. Kaushik Chattopadhyay |
|
2 |
Tungsten alloy hybrid structure using microwave sintering PI: Dr. GM Karthik Co-PIs: Dr. Pawan Sharma, Dr. Surya D. Yadav |
|
3 |
Aluminosilicate based Glass-ceramics PI: Dr. Subrata Panda Co-PIs: Dr. Kundan Kumar |
|
4 |
Maraging based medium entropy alloys via additive manufacturing PI: Dr. Praveen Sathiyamoorthy Co-PIs: Dr. G M Karthik, Dr. K Guruvidyathri |
|
5 |
Aluminum composite powders for additive manufacturing PI: Dr. Sree Harsha Nandam |
|
6 |
Numerical studies on the deformation behavior of different FCC-BCC alloys PI: Dr. Srihari Dodla Co-PIs: Dr. Debasis Khan |
|
7 |
To establish the synthesis route for α-Si3N4 powder through up-scalable technique PI: Dr. Kundan Kumar Co-PIs: Dr. Subrata Panda |
|
8 |
Mechanical properties of W alloy by stabilizing the binder phase, W-precipitates and intermetallic PI: Dr. Nikhil Kumar |
|
9 |
Development of an indigenous inert gas atomiser PI: Dr. Pawan Sharma Co-PIs: Prof. Santosh Kumar, Dr. Santosh Kumar Singh, Dr. Anubhav Sinha, Dr. G M Karthik |
|
10 |
Indigenous Additive manufacturing grade metal & alloy powders PI: Prof. N. C. Santhi, Dr. Subhasis Sinha, Dr. Pawan Sharma, Dr. Nikhil Kumar Co-PIs: Dr. Kausik Chattopadhyay, Prof. Santosh Kumar, Dr. Sanjay Singh, Dr. G M Karthik |