PhD. supervision

M. Tech supervision

1. SERB, DST, India "Wear, Corrosion and Biocompatibility of Tantalum (Ta)Coated 316LStainless Steel for Orthopedic Applications (2019-2022) 44.93 lakh (P.I).
2. DST-India, Studies on thermodynamic and Physico-chemical properties of lead –free solder alloys (DST- FAST TRACK Project for Young Scientist) (2010-2013) 14.4 lakhs (P.I)
3. IIT-BHU " Electro-chemical Corrosion and Oxidation Behavior of Lead-free Solder Alloys" (2017-19) 15 lakhs (P.I).
4. IIT-BHU "Solid particle Erosion of Engineering Materials" 2014-2017, 25 lakhs  (Co-P.I)
5. IIT-BHU "Thermodynamic Invesigations of the Multicomponent Metallic Solutions" 2006-2008, 0.5 lakhs (P.I)

2023

1. V Singh, D Pathote, D Jaiswal, KK Singh, CK Behera “Calorimetric measurements of Ga–In, Ga–Sn, and In–Sn binary alloy systems as sustainable lead-free solder alternatives” Journal of Materials Science: Materials in Electronics 34 (31)(2023), 2089
2. V Singh, D Pathote, D Jaiswal, MR Kumar, KK Singh, CK Behera,“Measurement of mixing enthalpies for Sn-Bi-Sb lead-free solder system”  Journal of Electronic Materials 52 (9)(2023), 6316-6334
3. P Gautam, AK De, I Sinha, CK Behera, KK Singh “Waste to wastewater treatment: Synthesis of CuO nanoparticles from discarded printed circuit boards for the removal of Methylene Blue under visible light” Materials Today: Proceedings(2023)
4. D Pathote, V Singh, D Jaiswal, RK Gautam, CK Behera, “Improving the electrochemical corrosion behavior of stainless steel (316L) through the deposition of tantalum-based thin films” Materials Today: Proceedings (2023)
5. P Gautam, AK De, MD Rao, I Sinha, CK Behera, KK Singh "Waste remediation: Low-temperature synthesis of hybrid Cu(OH)₂/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies" Environmental Science and Pollution Research (2023), 1-14
6. V Singh, D Jaiswal, D Pathote, KK Singh, CK Behera, "Measurement of mixing enthalpies for Bi-Zn lead-free solder system" Materials Today Proceedings (2023)
7. P Gautam, AK De, I Sinha, CK Behera, KK Singh, “Genesis of copper oxide nanoparticles from waste printed circuit boards and evaluation of their photocatalytic activity” Environmental Research 229(2023)115951
8. P Gautam, AK De, I Sinha, CK Behera, KK Singh "Facile recovery of CuO nanostructures from discarded Printed Circuit Boards: Evaluation of photocatalytic activity" Solid Waste (2023), 588.
9. D Pathote, P Kumari, V Singh, D Jaiswal, RK Gautam, CK Behera, “Biocompatibility evaluation, wettability, and scratch behavior of Ta-coated 316L stainless steel by DC magnetron sputtering for the orthopedic applications” Surface and Coatings Technology 459(2023),129392
10. AK Pandey, A Kumar, R Kumar, RK Gautam, CK Behera, “Tribological performance of SS 316L, commercially pure Titanium, and Ti6Al4V in different solutions for biomedical applications”Materials Today: Proceedings 78(2023) A1-A8
11. D Pathote, D Jaiswal, V Singh, CK Behera "Electrochemical corrosion behavior of tantalum coated 316L stainless steel by DC Magnetron sputtering for orthopedic applications" Applied Surface Science Advances, 13(2023), 100365.
12. A K Pandey, RK Gautam, CK Behera " Corrosion and wear behavior of Ti–5Cu-xNb biomedical alloy in simulated body fluid for dental implant applications, Journal of the Mechanical Behavior of Biomedical Materials, 137(2023), 105533.

2022

13. D Jaiswal, D Pathote, V Singh, CK Behera "Electrochemical behaviour of lead-free Sn-In-Al solders alloys in 3.5 wt.% NaCl solution"              Materials Today: Proceedings 57(2022), 187-193.
14. D Pathote, D Jaiswal, V Singh, CK Behera " Optimization of electrochemical corrosion behavior of 316L stainless steel as an effective biomaterial for orthopedic applications "  Materials Today: Proceedings 57(2022), 265-269.
15. V Singh, D Jaiswal, D Pathote, CK Behera "Drop calorimetric measurement of In-Zn system for Lead-Free solder applications " Materials Today: Proceedings 57(2022), 285-288.
16. S Kumar, D Jaiswal, CK Behera, GS Mahobia "Potentiodyanmic corrosion behavior of Fe–18Cr–21Mn-0.65 N austenitic stainless steel exposed at 400–700° C" Materials Chemistry and Physics, 126568(2022).
17. A kumar Pandey, RK Gautam, CK Behera " Microstructure, mechanical strength, chemical resistance, and antibacterial behaviour of Ti-5Cu-x% Nb biomedical alloy" Biomedical Materials, Volume 17(2022), 4 .
18. D Jaiswal, D Pathote, V Singh, CK Behera " Effect of Al Addition on Electrochemical Behavior of Sn-0.7 Cu-xAl Lead-Free Solders Alloys in 3.5 wt.% NaCl Solution" Journal of Materials Engineering and Performance, 1-11(2022).
19. P Gautam, CK Behera, I Sinha, G Gicheva, KK Singh, High added-value materials recovery using electronic scrap-transforming waste to valuable products, Journal of Cleaner Production 330 (2022), 129836.
20. D Jaiswal, S Kumar, CK Behera, “Electrochemical behavior of Sn-9Zn-xCu solder alloy in 3.5 wt% NaCl solution at room temperature” Materials Today Communications 33, 104627.
21. D Pathote, D Jaiswal, V Singh, RK Gautam, CK Behera “Wear behavior and microhardness studies of tantalum (Ta)-coated 316L stainless steel by DC magnetron sputtering for the orthopedic applications”Journal of Materials Science 57 (45), 21039-21056.

2021

22. D Jaiswal, V Singh, D Pathote, CK Behera " Electrochemical behaviour of lead-free Sn–0.7 Cu–xIn solders alloys in 3.5 wt% NaCl solution"   Journal of Materials Science: Materials in Electronics 32 (18)(2021), 23371-23384.

2020

23. Ankitendran Mishra C.K.Behera S.Mohana A.Mohan Dhananjay Pradhan "High temperature erosion behaviour of Type AISI 446 stainless steel under the combined effect of surface modification and pre hot-corrosion" Engineering Failure Analysis, Volume 118,( 2020), 104873.

2019

24. MR Kumar, V Singh, VK Rai, CK Behera "Investigation On Mixing Heat Effect Of Bi-In And In-Sn System At 730 K " Materials Today: Proceedings 18 (2019) 2917–23.
25. C.K. Behera, M. R. Kumar, S.Mohan  "Drop Calorimetric Measurements Of In-Sn System For Lead-Free Solder Applications"                International Journal of Mechanical and Production Engineering, Vol. 7(6)(2019), pp. 16-20.
26. VK Rai, MR Kumar, CK Beher "Analysis Of Corrosion Behavior And Its Characterization Of In-Sn-Bi Alloy" Materials Today: Proceedings 18 (2019) 2322–2328.
27. M. R. Kumar, C.K. Behera, S.Mohan  "Measurement of Electrical Properties of Sn-Bi-In Alloys" Journal of Electronic Materials, vol. 48(10)(2019), pp. 6561-6569.
28. Kumar M. R.; Mohan, S.; Behera, C. K. "Measurements of Mixing Enthalpy for a Lead-Free Solder Bi-In-Sn System" Journal of Electronic Materials, 48(12)(2019), 8096.
29. Mohd Talha, Yucong Ma, Yuanhua Lin, Yong Pan, Xiangwei Kong, O.P. Sinha and C.K. Behera "Corrosion performance of cold deformed austenitic stainless steels for biomedical applications" Corr. Rev., vol. 37(5)(2019), 283-306.
30. Ankitendran Mishra, C K Behera, S Mohan and A Mohan "Effect of Prehot Corrosion onErosion Behavior of High Chromium Ferritic Steel for Heat Exchangers"  J. Tribol. 141(4)(2019): 041607.

2018

31. M.R.Kumar S.Mohan C.K.Behera  "Thermodynamic accessment experimentally on Bi-Sn System by Calorimete" Materials Today: Proceedings 5 (2018) 27777–85.
32. M. R. Kumar, S. Mohan and C. K. Behera "Drop Calorimetric Measurements on BinaryBi–In System" International Journal of Thermophysics (2018) 39 :101.
33. Ankitendran Mishra, C K Behera, S Mohan and A Mohan, "Erosive wear of 446SS ferritic steel: a potential material for heat exchangers application" Mater. Res. Express 5(2018) 106522.
34. Ankitendran Mishra, Dhananjay Pradhan, C K Behera, S Mohan and A Mohan, "Modeling and optimization parameters for high-temperature solid particle erosion of the AISI446SS using RSS and ANN" Mater. Res. Express, 6 (2018) 026513

2017

35. Ramkumar Chandran, C.K.Behera and Archana Mallik "Electrochemical Impedance (EIS) behavior of CuInSe2 (CIS) thin films on high resistance ITO/PET flexible substrates  ICSEP 2016" Materials Today: Proceedings 4 (2017) 12473–12479.

2016

36. M. R. Kumar, S. Mohan and C. K. Behera"Measurement of Activity of Indium in Liquid Bi-In-Sn Alloys by EMF Method" Journal of Electronic Materials, 45(8) 2016, 4314-23.

2015

37. Mohd Talha, C. K. Behera and O. P. Sinha "Effect of nitrogen and cold working on structural and mechanical behaviour of Ni-free nitrogen containing austenitic stainless steels for biomedical applications" Materials Science and Engineering C 47 (2015) 196–203.
38. SK Sahoo, A Mallik, CK Behera, “Electrochemical Synthesis and Characterization of Few Layer Graphene Nanosheets”

2014

39. Mohd Talha, C. K. Behera, Sudershan Kumar,Om Pal, Gurmeet Singh and O. P. Sinha "Long term and electrochemical corrosion investigation of cold worked AISI 316L and 316LVM stainless steels in simulated body fluid"  RSC Adv., (2014), 4, 13340-13349.
40. MohdTalha, C. K. Behera and O. P. Sinha "Effect of cold working on biocompatibility of Ni-free high nitrogen austenitic stainless steels using Dalton's Lymphoma cell line" Materials Science and Engineering C 35 (2014) 77–84.
41. Mohd Talha, C. K. Behera and O. P. Sinha "Promising in-vitro performances of nickel-free nitrogen containing stainless steels for orthopedic applications"   Bull. Mater. Sci., Vol. 37, No. 6, (2014), pp. 1321–1330.
42. Mohd Talha, C. K. Behera and O. P. Sinha "In-vitro long term and electrochemical corrosion resistance of cold deformed nitrogen containing austenitic stainless steels in simulated body fluid" Materials Science and Engineering C 40 (2014) 455–66.

2013

43. C. K. Behera and A. Sonaye "Measurement of zinc activity in the ternary In-Zn-Sn alloys by EMF method" Thermochimica Acta 568 (2013) 196–203.
44. M Talha, CK Behera, OP Sinha ”A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications” Materials Science and Engineering: C 33 (7)(2013), 3563-3575.

2012

45. Mohd Talha, C. K. Behera and O. P. Sinha " Potentiodynamic polarization study of Type 316L and 316LVM stainless steels for surgical implants in simulated body fluids" Journal of Chemical and Pharmaceutical Research, 4(1) (2012):203-208.

2009

46. C.K. Behera and M. Shamsuddin "Thermodynamic Investigations of Ternary Sn-Zn-Ga liquid Solution" Thermochimica Acta 487 (2009) 18-25.
47. S. Sarkar, A. Mohan, C. K. Behera and S. Mohan "Comparative study of sliding wear characteristics of Ni and N – austenitic steel" Tribology Materials Surfaces and Interfaces, vol. 3(2)(2009) pp. 92.

2008

48. C.K. Behera and M. Shamsuddin " Thermodynamic Investigations of Ternary Cd-Zn-Ga liquid Solution" Metall. Mater. Trans.B, vol. 39B(2008), pp. 551-560.

2000

49. K.T. Jacob and C.K. Behera "Equilibria Involving the Reciprocal Spinal Solid Solution (MgXFe1-X) (AlyCr1-y)2O4: Modeling and Experiment" Metall. Mater. Trans.B, vol. 31 B(2000), 1247-1259.

1999

50. K.T. Jacob and C.K. Behera "Spinel-Corundum Equilibria and Activities in the System MgO-Al2O3-Cr2O3 at 1473K"  Metall. Mater. Trans.B, vol. 31B (1999), 1323-1332.

• Professor in charge, Dept. Library.
• Convener, DUGC
• Convener, DPGC
• Member, Anti ragging squad
• Admin Warden, Aryabhatt Hostel
• Member, Faculty Forum executive body
• Co-ordinator, CMD Division of Metallurgical Engineering
• Member, condemnation committee
• Institute representative for JEE
• Observer JEE Advance
•  Captain, Institute staff Badminton team
•