pshukla.mec's picture
Dr. Prashant Shukla
Professor
Department of Mechanical Engineering,IIT (BHU)
pshukla.mec@iitbhu.ac.in
9452563956
Area of Interest: 
Thermal and Fluid Sciences

1. P. Shukla, V. Eswaran and B. S. Murthy, “A fully Spectral Method for hyperbolic equations”, International Journal for numerical methods in engineering Vol. 39, 67-799 (1996).
2. V. C. Srivastava, Prashant Shukla and S. N. Ojha, “Processing of Metal-Matrix Composites by Spray Forming process”, Proceedings of the Indo-German Workshop on High Temperature Fibre Reinforced Composites (Ed. V. K. Srivastava), Allied Publishers,(2000) pp 120-31
3. P. Shukla, R. K. MandaI and S. N. Ojha, “Micro structural Modification Induced by Spray Forming of Al- Cu Alloys”, Mat. Sc. & Engg., 304-306(2001)583-86
4. V. C. Srivastava, P. Shukla and S. N. Ojha, “Micro structural features induced during spray forming process”, J. Mat & Mat. Sci 43 No. (2001) pp 77-91
5. Prashant Shukla, R. K. Mandal and S. N. Ojha, “Non-equilibrium Solidification of under cooled Droplets during Spray Atomization”, Bull. Mater Sc. 24(2001) pp 547-554
6. P. Shukla, N. S. Mishra and S. N. Ojha, “Modeling of Heat Flow and Solidification During Atomization and Spray of Al-4.5 Cu Alloy”, Journal of Thermal Spray Technology 12 NO.1 (2003) pp 95-100.
7. P. Shukla, V. C. Srivastava, R. K. Mandal and S. N. Ojha, “Modeling of Heat Flow and Solidification during Spray Deposition”, Solidification Science and Processing, Outlook for 21st Century, Oxford Publishing Co.(2001) pp 78-89.
8. P. Shukla and S. N. Ojha, “Under Cooling and Solidification of Droplets during Spray Processing”, Proc. Seminar on Computer Application in Metallurgy, Sindri (2002), Ed. P.R. Prasad, pp 32-41.
9. H. Shah, A. K. Majumdar, J. P. Barnwal and P. Shukla, “Development of Pressure- Throughput Correlation for a 76 mm Vorsyl Separator”, International Conference on Emerging Trends in Mineral Processing and Extractive Metallurgy, Bhubaneshwar, India, June 2005, pp 525-532
10.A.K.Majumder, H. Shah, J. P. Barnwal and P. Shukla, “Water Split  Behaviour in Cylindrical and Conical Cyclones”, International Seminar on Mineral Processing Technology, Chennai, India, March 2006
11.A.K.Majumder, H. Shah , P. Shukla and J. P. Barnwal, “Effect of Operating Variables on shape of "Fish-hook" curves in Cyclones”, Minerals Engineering, Elsevier,Volume 20, Issue 2, February 2007, Pages 204-206
 12. Sujeet Kumar Shukla, Prashant Shukla, Pradyumna Ghosh, “Evaluation       
of numerical schemes for dispresed phase modelling of cyclone separators”, Journal of Engineering Applications of Computational Fluid Mechanics Vol. 5, No.2, pp.235-246(2011). 
13. Sujeet Kumar Shukla, Prashant Shukla, Pradyumna Ghosh, “Evaluation of numerical schemes using different simulation methods for the continuous phase modelling of cyclone separators”, Journal of Advanced Powder Technology 22 (2011) 209-219, Elsevier. 
14. Sujeet Kumar Shukla, Prashant Shukla, Pradyumna Ghosh, “The effect of modeling of velocity fluctuations on prediction of collection efficiency of cyclone separators”, Applied Mathematical Modelling ,37 (2013) 5774–5789  http://dx.doi.org/10.1016/j.apm.2012.11.019 
15. Ankit Tiwari and P.Shukla, “ Analysis of Weber number variation in high pressure diesel engine sprays”, International Conference on Thermal Energy and Environment (INCOTEE-2011), Kalasalingam University, Tamil Nadu, India 
16. A.Ray, P.K.Panigrahi and P.Shukla, “Instability Modes during Electro-Atomisation for Micro/Nano Particle fabrication: a Non-Dimensional”, Proceedings of ASME 2013 Fluids Engineering Division FEDSM2013-16625, July 7-11, 2013, Nevada, USA
 17. Arun Kumar, Aman Jain and P.Shukla, " Study of path Instability of a Rising Oil Droplet using PIV", XXIV, ICTAM, 21-26 August, Montreal , Canada.  http://iutam.org/wp-content/uploads/2017/02/ICTAM_Proceedings_Vol_2.pdf 
18. S.K. Yadav,  P. Shukla and  R.S. Singh, " Isokinetic and Anisokinetic Sampling Effect in the Evaluation of  Particle Size Distribution of Aerosol", 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Paper ID Number: IHMTC2017-07-0598, December 27-30, 2017 at BITS Pilani, Hyderabad Campus 
19. P.Shukla, Jyoti Pancpal and Mantavya Agarwal,  " Prediction of Diameter of  Rising Droplets Formed at the Tip of a Capillary", 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Paper ID Number: IHMTC2017-13-0639, December 27-30, 2017 at BITS Pilani, Hyderabad Campus 
20. S.K. Yadav, Y. Sharma, P. Shukla and R.S. Singh, " Facility for physical characterization of aerosols generated in closed chamber combustion" , Measurement (Elsevier), (Communicated), 2018 
21. S.K. Yadav, M. Kumar, Y. Sharma, P. Shukla, R.S. Singh and T.Banerjee, " Time resolved evolution of submicron particles during extreme fireworks",  Aerosol and Air Quality Research (Springer) (Communicated), 2018

 

1. An AICTE-MODROBS (Scheme for Modernisation and Removal of  Obsolescence in Technical Education) project was submitted on behalf of the Department of Mechanical Engineering, IIT(BHU) for modernization of the Fluid Mechanics Laboratory in 2009. The Rs.10 lacs sanctioned grant was used for setting a subsonic wind tunnel. 
2. Electrohydrodynamic atomization for micro/nano capsule formation in targeted drug delivery, DST, 2010-13 (Completed), 28 lacs, PI
 
3.  Design of high temperature facility for graphite dust formation and transport, BRNS (Dept. of Atomic Enery, GoI), 2014-18, (Ongoing), 55 lacs, PI